SKU:CS-652-R1
Greystone CS-652-R1 AC Current Sensor, Solid core sensor, 4 - 20 mA, (Average) 0 - 10 / 20 / 50 amp ranges, selectable
Greystone CS-652-R1 AC Current Sensor, Solid core sensor, 4 - 20 mA, (Average) 0 - 10 / 20 / 50 amp ranges, selectable
Couldn't load pickup availability
Greystone CS-652-R1 is a solid-core AC current sensor with a 4-20 mA output representing monitored load current. Its measurement ranges are 0-10 A, 0-20 A, 0-50 A, switch-selectable. It is loop-powered and requires a 15-30 Vdc supply.
Specified accuracy is +/-2% full-scale output over 5-100% of the selected measurement range. Maximum continuous input current is 100 A, distinct from the calibrated measurement range. Operating frequency is 50/60 Hz. Typical response time is 250 ms for 0-90% response, and the typical output load is 250 ohm.
Install inside an electrical enclosure using the integral tab for surface-screw mounting. The sensor uses a two-wire connection to the building automation system, and screw terminals accept 14-22 AWG wiring. Use insulated conductors only; the published insulation class is 600 Vac. Follow manufacturer installation instructions and applicable electrical safety procedures.
The conductor aperture is 20.3 mm (0.8 in), and specification-table dimensions are 67 x 68.6 x 24.1 mm (2.65 x 2.7 x 0.95 in). Enclosure material is ABS/polycarbonate with a UL94-V0 material rating. Operating conditions are -15 to 60 C (5-140 F) and 5-90% RH, non-condensing.
Applications include AC load-current monitoring for pumps, conveyors, machine tools and fans. This sensor provides an analog current-measurement signal, not the on/off output of a current switch.
Product Literature
- Datasheet — Greystone CS-652 Current Sensor Datasheet
Share
