SKU:DPFS5
Greystone DPFS5 Differential Pressure Flow Sensor 250mm (10") ABS
Greystone DPFS5 Differential Pressure Flow Sensor 250mm (10") ABS
Couldn't load pickup availability
Greystone DPFS5 is a duct-mounted differential pressure flow sensor with a documented sensing length of 25.26 cm. It is designed for the inlet section of variable air volume (VAV) terminal units and fan terminal units, and can also sense differential pressure at other locations in main or branch duct systems. Differential pressure between its high (H) and low (L) ports can be used to determine airflow with a connected pressure instrument.
The light-grey ABS/polycarbonate construction has a UL94-5V material rating. The probe diameter is 6 mm (0.236 in), and mounting uses an integral flange with a gasket. The pneumatic connection uses a 6.35 mm nipple and tubing specified as 6.35 mm (1/4 in) inside diameter and 9.5 mm (3/8 in) outside diameter. The specified tubing material is polyethylene. Operating temperature is 4-49 C (40-120 F).
For this model, the manufacturer specifies horizontal installation to assure accurate velocity readings. Orient the sensor according to its marked flow arrow. Cut a 2.25 cm (7/8 in) hole in the duct, insert the unit, and secure it through the 4.75 mm (3/16 in) mounting holes with two self-tapping screws, following the manufacturer installation instructions.
Connect the H port to the high input and the L port to the low input of a differential pressure gauge, transmitter or switch. Route tubing without sharp bends or creases at connections to reduce the risk of leaks as it ages. Calibration may be necessary; the manufacturer describes a duct or fan traverse to compare the sensed differential pressure with actual airflow.
Product Literature
- Datasheet — Greystone DPFS Series Datasheet
Share
