SKU:ETP-9520-E
Greystone ETP-9520-E E/P Transducer, 4-20 mA Input, 3-15 PSIG Output, Enclosure
Greystone ETP-9520-E E/P Transducer, 4-20 mA Input, 3-15 PSIG Output, Enclosure
Couldn't load pickup availability
Greystone ETP-9520-E is an electronic-to-pneumatic transducer that converts a 4-20 mA electrical input to a proportional, direct-acting 21-103 kPa (3-15 PSIG) nominal pneumatic output. It is used to position pneumatic damper and valve actuators in HVAC systems.
The 9520 model accepts a two-wire 4-20 mA input and is powered by the process loop signal; no separate electrical power supply is required. The -E option provides an enclosure, with published dimensions of 116 x 84 x 54 mm (4.56 x 3.32 x 2.11 in). It is the enclosure option, not the separate -EG enclosure-and-gauge option.
Provide clean, dry, oil-free air at a nominal 138 kPa (20 PSIG) supply, with a maximum supply pressure of 207 kPa (30 PSIG). Maximum air consumption is 5.66 ml/s (0.012 SCFM) at a 138 kPa (20 PSIG) supply. Maximum output air capacity is 141 ml/s (515 SCIM) at the same supply pressure.
Specified linearity and hysteresis are each +/-1% of span. Zero and span potentiometers provide adjustment; the published span limits are 55-97 kPa (8-14 PSIG), with offset limits of 7-41 kPa (1-6 PSIG). Operating conditions are 0-60 C (32-140 F) and 5-95% RH, non-condensing.
Screw terminals accept 14-22 AWG wiring. Male barbed fittings provide connections for flexible pneumatic tubing; follow the manufacturer connection instructions. The PG-100-30 pressure gauge and K-335 0.01-micron pneumatic air filter are listed as unmounted accessories in the family datasheet.
Product Literature
- Datasheet — Greystone ETP Series Datasheet
Share
