SKU:FPP6-K
Greystone FPP6-K (Kit contains) Two 150 mm (6") Stainless steel flow pressure probe probe /w 1.83 m pneumatic tubing
Greystone FPP6-K (Kit contains) Two 150 mm (6") Stainless steel flow pressure probe probe /w 1.83 m pneumatic tubing
Couldn't load pickup availability
Greystone FPP6-K is a flow pressure probe kit containing two matching FPP6 probes and a total of 1.83 m (6 ft) of pneumatic tubing. Each probe is 150 mm (6 in) long. The FPP probes use impact sensing for pressure pickup in the inlet section of variable air volume (VAV) terminal units and fan terminal units, and can also be used at other pressure-sensing locations in main or branch duct systems.
Each probe is made from 304 series stainless steel with a diameter of 6.35 mm (0.250 in). The mounting bracket is ABS with a UL94-5VB material rating. The probe's specified connection is a 6.35 mm (1/4 in) nipple for 9.5 mm (3/8 in) outside-diameter polyethylene tubing. This connection specification describes probe compatibility; it does not specify the material or outside diameter of the tubing supplied in this kit.
For each probe, the manufacturer recommends selecting a location 5-8 duct diameters from elbows, obstructions or significant changes in duct area. Drill an 8 mm (5/16 in) hole, insert the probe, and orient it according to the marked flow direction. Install horizontally and secure the bracket through its 4.75 mm (3/16 in) mounting holes with two self-tapping screws, following the manufacturer installation instructions.
Route the pressure tubing without sharp bends at connections, since bends and creases can develop leaks as tubing ages. The 1.83 m (6 ft) tubing quantity is the total for the kit, not a separate 6 ft length for each probe. The shared FPP/SPP datasheet provides the base-probe specifications and installation guidance.
Product Literature
- Datasheet — Greystone FPP-SPP Series Datasheet
Share
